VanTento

zurück zur Übersicht

storm-proof poles

Storm-proof aluminium poles - Made in Germany - with quick release

Velcro connector

The Velcro connector also connects the individual parts of the VanTento.

Piping

The tarp is attached in the traditional way to a piping rail. With the California T5/T6 this works directly with the Alurail.

Crossbar

An optional crossbar is available for better stabilization.

Magnetic pads

Our magnetic pads are simply attached to the tarp with Velcro. You can use them to, for example, run a triangle along the vehicle or simply attach our tarp to the tailgate as a shower tent.

...even more details

  • Linking the individual parts

    All single tarps have overlapping eyelets at the corners through which the poles are pushed.

  • The Velcro connector

    The Velcro connector is simply attached to the fleece sides of the tarps and additionally connects the individual components.

  • The storm protection

    With vehicle piping made of plastic or hard rubber, it can happen that the tarp comes loose from the piping in strong winds. To avoid this, we have installed extra eyelets on both sides, which are also connected to the vehicle. On the vehicle side, you can use piping stones or our strong magnets (120kg + suction cup effect).

  • The magnetic holders

    You can also use our magnetic holders to hold our tarp, for example on the tailgate or along the vehicle. The magnetic holders are simply attached to the fleece - done.

  • The crossbar

    The crossbar allows you to tension the VanTento extremely well and set it up stably. Three loops ensure that everything sits neatly.

  • The triangle can also be attached directly to the vehicle.

    The triangle has two sides that are the same length as the square and can therefore be set up as a single tarp. Only one pole is then required.